www.joanscurtains-blinds.co.uk
curtain-maker for windows with style
home    l    measuring    l   gallery   l   fittings   l   contact us  
Telephone: 01267 237300 :: Email: enquiries@joanscurtains-blinds.co.uk  
How to measure your windows……a metal tape measure is
recommended for accuracy
Austrian and Roman blinds

Austrian and Roman blinds

Austrian and Roman blinds


 


To fix your blinds you will need to take into account the direction the window opens, and to check that window catches will not interfere with the operation. With metal window frames ensure there is a suitable surface onto which you can screw the fixtures.

Recess fixing …….

To fit blind inside the window a minimum recess depth of 7.5cm is required. Check the window recess is square by measuring the width at top and bottom. If there is a difference, take the smaller of the two measurements, more than 2cm a recess Roman Blind is not possible.

There are only 2 measurements required
Length - measure between the top and required finished length.

Width - measure inside the recess, the Blind can be wide enough to cover the whole frame or leave the frame exposed.

Bay windows - There should be a gap in the corners of the bay to accommodate the wooden batons, and facilitate easy movements of blinds.


Face fixing …..

Measure the window itself, and add, if possible, a minimum of 7.5 cm to the length and 12.5cm to the width, to be sure the finished Roman or Austrian Blind cover the window adequately.

Tab top and Slotted through fixing…..

Both Roman and Austrian Blinds can have a Tab Top Heading, our unique Wooden Pole were all components are hidden neatly away behind the fabric are available, please indicate on enquiry for pricing.

For the width, measure between the decorative ends of the pole (pole must be fixed approx 15cm above the window and extended 7.5cm each side) For the length, measure from the top of the curtain pole to where the blind is to finish. Not recommend for recess fixing, but Dorma Windows can look very stylish with either of these window treatments.

Send your window/blind measurements, choice of style for your proposed blinds, a small sketch or picture would be useful.

Price will include all Blinds components with a standard covered wooden fixing batten, or, should you require the new contract fittings which are also easy to install and uses a chain to raise and lower the blinds please indicate your preference as these fittings are extra. Details are on the 'Fittings' page.

Your completed blind will be delivered on average three to four weeks from receiving your fabric, with all components, and fixing instructions Delivery is by carrier and included on the quotation. Please do not hesitate to telephone 01267 237300 or regarding any queries of this service.

Thank you for your interest and look forward to helping you with Curtains, Roman, and Austrian Blinds for your windows with style.


home    l    measuring    l    gallery   l    fittings    l    contact us
content © 2005-8 Joans Curtains & Blinds
Website by AlgolOnline